Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

XE4202M | 1514003

  • Available in:
  • Asia
  • Australia/New Zealand
  • EMEA
  • Latin America
  • North America

CommScope 10G EPON Remote Optical Line Terminal (R OLT) OLT with DPoE ™ for NH series nodes and VHub/ UVHubs in a triple wide module

Contact Us for a Quote
Specifications
Finish making your selections or clear them to view relevant specifications.
Get Connected to the Access Technologies Resource Center

Find manuals, quick guides, data sheets, videos and much more!

Explore Access Technologies Resource Center

Features and Benefits
PRELIMINARY SPECIFICATION


CommScope XE4202M R-OLT Module

The XE4202 10G EPON R-OLT (Remote Optical Line Terminal) module for CommScope HFC Nodes and VHubs is specifically designed for cable MSOs to substantially increase the ROI of their existing network infrastructure by adding high bandwidth 10G EPON based services to their legacy DOCSIS® HFC network. The R-OLT lowers the cost of deploying PON, saves space and power using existing assets, and drives PON based services through the last mile, enabling the migration to FTTX through seamless coexistence of RF/HFC, RFoG overlay, and digital returns all in the same enclosure, supporting nodes with coexistent RF/PON, or VHubs with RFPON (RFoG+PON overlay) or PON-only services.

The R-OLT incorporates full traffic management and PON MAC/PHY capabilities in a compact module and utilizes standard long haul 10GE uplinks, including CWDM and DWDM options, to connect to the S-Leaf switch/router in their Converged Interconnect Network (CIN), so operators can extend the deployment of FTTX to serve customers at distances well beyond the typical 20km reach of centralized chassis-based PON, while utilizing their transport backhaul fiber resources efficiently. For subscriber access, the R-OLT includes two 10G EPON ports, each supporting coexistent symmetric 10G/10G, and 1G/1G or Turbo EPON data speeds. Each 10G EPON port is fully interoperable with 1G and 10G ONUs via DPoE V2.0 OAM and supports 128 ONUs for a total of 256 subscriber ONUs per R-OLT module.


CommScope OLT Manager

The R-OLT is managed through its full lifecycle by the cloud-based CommScope OLT Manager software-defined networking (SDN) application. The OLT Manager integrates seamlessly with existing DOCSIS® provisioning and OSS systems through the CableLabs™ DPoE V2.0 specification with full flexibility for existing management, service provisioning and operational support systems and processes already in use in the HFC plant, such as DHCP, TFTP, NTP, syslog, ToD, SNMP and IPDR.

The high-availability OLT Manager facilitates and simplifies network management and programmability to support the high scalability requirements of operating a disaggregated PON network, by reducing the number of interface points to operator back-office systems. Each OLT Manager HA pair supports up to 200 R-OLTs (400 PON Ports) which equates to 51,200 ONUs with 1x128 splits per OLT Manager.

The R-OLT and OLT Manager system allows operators to cost-effectively migrate to standards-based 10G EPON as it becomes required by bandwidth demand and potential revenue, all while maintaining DOCSIS® provisioning compatibility.

Product Classification

Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America
Product Type Remote OLT

General Specifications

Gen: LED Indicator, PWR Dark = Module OFF (not receiving power) | Green = Module ON (receiving power)
LED Indicator, PON Refer to TM 1512184 XE4202M Physical Installation Guide for LED indicator colors and definitions
Ports, Network Side CommScope qualified SFP+ transceivers are purchased separately | LC Duplex: Two (2) network-side optical ports (NSI Port 0 and NSI Port 1) support single-mode SFP+ (10 Gbps) cages for standard uplink applications
Ports, Subscriber Side CommScope qualified XFP transceivers are purchased separately | Each port supports up to 128 subscriber ONUs: (256 total per module, using external splitters) | Two (2) simplex bidirectional IEEE 802.3av 10G EPON subscriber-side optical XFP plug-in ports (PON 0 and PON 1) for 10G/10G (10GBASE-PR30), 10G/1G (10/1GBASE-PRX30), and 1G/1G (1000BASE-PX20) optical transceiver support
Provisioning and Monitoring OLT Manager application: Operator-based virtualized R-OLT lifecycle manager and DPoE provisioning system interface for Optical Network Units (ONUs)

Dimensions

Height 38.100 mm | 1.5 in
Width 101.600 mm | 4 in
Length 165.100 mm | 6.5 in

Port Configuration

Click on image to enlarge.

Electrical Specifications

Electrical Safety Standard CAN/CSA-C22.2 No. 60950-1-07+Amd 1+Amd 2 | CAN/CSA-C22.2 No.60950-22-07+GI1 (R2012) | EN 60950-1:2006+A11+A1+A12+A2 | EN 60950-22: 2006+A11 | IEC 60950-1:2005+A1+A2 | IEC 60950-22:2005 | IEC/EN 60825-1:2014 | IEC/EN 60825-2:2004+A1+A2 | UL 60950-1-07+A1+A2 | UL 60950-22:2007 R12.11
Electrical Safety Standard Note Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Electromagnetic Compatibility (EMC) CFR 47 Part 15, Subpart B, Class A | CISPR 24 IEC/EN 55024 | CISPR 32 IEC/EN 55032 | VCCI A | VCCI B | VCCI V-32-1
Power Consumption Note 35.5 W maximum, including two (2) XFP and two (2) SFP+ transceivers operating at 10/10 or 10/1 Gbps
Power Requirements +24VDC and +5VDC, supplied by NH2000, NC/NH4000 VHub/UVHub platform | PS4101 or PS4102 power supplies (required), depending on the node/VHub platform used

Ordering Tree

Click on image to enlarge.

Environmental Specifications

Operating Temperature -40 °C to +60 °C (-40 °F to +140 °F)
Storage Temperature -40 °C to +60 °C (-40 °F to +140 °F)
Relative Humidity 5%–95%, non-condensing

Packaging and Weights

Weight, net 1.293 kg | 2.85 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
UK-ROHS Compliant

Product Classification

Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America
Product Type Remote OLT

General Specifications

Gen: LED Indicator, PWR Dark = Module OFF (not receiving power) | Green = Module ON (receiving power)
LED Indicator, PON Refer to TM 1512184 XE4202M Physical Installation Guide for LED indicator colors and definitions
Ports, Network Side CommScope qualified SFP+ transceivers are purchased separately | LC Duplex: Two (2) network-side optical ports (NSI Port 0 and NSI Port 1) support single-mode SFP+ (10 Gbps) cages for standard uplink applications
Ports, Subscriber Side CommScope qualified XFP transceivers are purchased separately | Each port supports up to 128 subscriber ONUs: (256 total per module, using external splitters) | Two (2) simplex bidirectional IEEE 802.3av 10G EPON subscriber-side optical XFP plug-in ports (PON 0 and PON 1) for 10G/10G (10GBASE-PR30), 10G/1G (10/1GBASE-PRX30), and 1G/1G (1000BASE-PX20) optical transceiver support
Provisioning and Monitoring OLT Manager application: Operator-based virtualized R-OLT lifecycle manager and DPoE provisioning system interface for Optical Network Units (ONUs)

Dimensions

Height 38.100 mm | 1.5 in
Width 101.600 mm | 4 in
Length 165.100 mm | 6.5 in

Electrical Specifications

Electrical Safety Standard CAN/CSA-C22.2 No. 60950-1-07+Amd 1+Amd 2 | CAN/CSA-C22.2 No.60950-22-07+GI1 (R2012) | EN 60950-1:2006+A11+A1+A12+A2 | EN 60950-22: 2006+A11 | IEC 60950-1:2005+A1+A2 | IEC 60950-22:2005 | IEC/EN 60825-1:2014 | IEC/EN 60825-2:2004+A1+A2 | UL 60950-1-07+A1+A2 | UL 60950-22:2007 R12.11
Electrical Safety Standard Note Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Electromagnetic Compatibility (EMC) CFR 47 Part 15, Subpart B, Class A | CISPR 24 IEC/EN 55024 | CISPR 32 IEC/EN 55032 | VCCI A | VCCI B | VCCI V-32-1
Power Consumption Note 35.5 W maximum, including two (2) XFP and two (2) SFP+ transceivers operating at 10/10 or 10/1 Gbps
Power Requirements +24VDC and +5VDC, supplied by NH2000, NC/NH4000 VHub/UVHub platform | PS4101 or PS4102 power supplies (required), depending on the node/VHub platform used

Environmental Specifications

Operating Temperature -40 °C to +60 °C (-40 °F to +140 °F)
Storage Temperature -40 °C to +60 °C (-40 °F to +140 °F)
Relative Humidity 5%–95%, non-condensing

Packaging and Weights

Weight, net 1.293 kg | 2.85 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
UK-ROHS Compliant

Product Specification

Product Specification