For other alternatives, please contact us for more information.

0 Alternative products available

884057904/10 | CS41R BLU C6A 4/23 U/UTP RL 305M

Base Product: CS41R

Available in:
Asia
Australia/New Zealand

CS41R, ETL Verified Category 6A U/UTP Cable, non-plenum, blue jacket, 4 pair count, 1000 ft (305 m) length reel

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Specifications

Product Classification

Regional Availability	Asia \| Australia/New Zealand
Portfolio	NETCONNECT®
Product Type	Twisted pair cable

General Specifications

Product Number	CS41R
ANSI/TIA Category	6A
Cable Component Type	Horizontal
Cable Type	U/UTP (unshielded)
Conductor Type, singles	Solid
Conductors, quantity	8
Jacket Color	Blue
Pairs, quantity	4
Separator Type	Isolator
Transmission Standards	ANSI/TIA-568.2-D \| IEC 61156-5

Dimensions

Cable Length	304.8 m \| 1000 ft
Diameter Over Insulated Conductor	1.113 mm \| 0.0438 in
Diameter Over Jacket, nominal	7.087 mm \| 0.279 in
Jacket Thickness	0.508 mm \| 0.02 in
Conductor Gauge, singles	23 AWG

Cross Section Drawing

Click on image to enlarge.

Electrical Specifications

dc Resistance Unbalance, maximum	4 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	67 %
Operating Frequency, maximum	500 MHz
Operating Voltage, maximum	80 V
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Safety Voltage Rating	300 V

Electrical Cable Performance

CommScope

Std

Refers to the standard value listed under Transmission Standards in the Electrical Specifications above

Typ

Typical

Insertion Loss (dB/100m)

Near End Crosstalk (dB/100m)

ACR

Attenuation to Crosstalk Ratio (dB/100m))

PSNEXT

Power Sum Near End Crosstalk (db/100m)

PSACR

Power Sum Attenuation to Crosstalk Ratio (dB/100m)

ACRF

Attenuation to Crosstalk Ratio - Far End (dB/100m)

PSACRF

Insertion Loss (dB/100m)

Return Loss (dB)

Frequency	IL, STD	NEXT, STD	ACR, STD	PSNEXT, STD	PSACR, STD	ACRF, STD	PSACRF, STD	RL, STD
1.00 MHz	2.1	75.3	73.2	72.3	70.2	68.0	65.0	20.0
4.00 MHz	3.8	66.3	62.5	63.3	59.5	55.9	53.0	23.0
8.00 MHz	5.3	61.7	56.4	58.7	53.4	49.9	46.9	24.5
10.00 MHz	5.9	60.3	54.4	57.3	51.4	48.0	45.0	25.0
16.00 MHz	7.5	57.2	49.7	54.2	46.7	43.9	40.9	25.0
20.00 MHz	8.4	55.8	47.4	52.8	44.4	42.0	39.0	25.0
25.00 MHz	9.4	54.3	44.9	51.3	41.9	40.0	37.0	24.3
31.25 MHz	10.5	52.9	42.4	49.9	39.4	38.1	35.1	23.6
62.50 MHz	15.0	48.4	33.4	45.4	30.4	32.1	29.1	21.5
100.00 MHz	19.1	45.3	26.2	42.3	23.2	28.0	25.0	20.1
155.00 MHz	24.1	42.4	18.3	39.4	15.3	24.2	21.2	18.8
200.00 MHz	27.6	40.8	13.2	37.8	10.2	22.0	19.0	18.0
250.00 MHz	31.1	39.3	8.3	36.3	5.3	20.0	17.0	17.3
300.00 MHz	34.3	38.1	3.9	35.1	0.9	18.4	15.5	16.8
350.00 MHz	37.2	37.1	-0.1	34.1	-3.1	17.1	14.1	16.3
400.00 MHz	40.1	36.3	-3.8	33.3	-6.8	15.9	13.0	15.9
500.00 MHz	45.3	34.8	-10.5	31.8	-13.5	14.0	11.0	15.2

Material Specifications

Conductor Material	Bare copper
Insulation Material	Polyolefin
Jacket Material	PVC
Separator Material	Polyolefin
Tape Material	Poly/Aluminum/Poly

Mechanical Specifications

Pulling Tension, maximum

11.34 kg | 25 lb

Environmental Specifications

Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Environmental Space	Non-plenum
Flame Test Method	CMR \| NEC Article 800 \| UL 1666 \| UL 910

Packaging and Weights

Cable weight	46.297 kg/km \| 31.11 lb/kft
Packaging Type	Reel

Regulatory Compliance/Certifications

Agency	Classification
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant

Product Classification

Regional Availability	Asia \| Australia/New Zealand
Portfolio	NETCONNECT®
Product Type	Twisted pair cable

General Specifications

Product Number	CS41R
ANSI/TIA Category	6A
Cable Component Type	Horizontal
Cable Type	U/UTP (unshielded)
Conductor Type, singles	Solid
Conductors, quantity	8
Jacket Color	Blue
Pairs, quantity	4
Separator Type	Isolator
Transmission Standards	ANSI/TIA-568.2-D \| IEC 61156-5

Dimensions

Cable Length	304.8 m \| 1000 ft
Diameter Over Insulated Conductor	1.113 mm \| 0.0438 in
Diameter Over Jacket, nominal	7.087 mm \| 0.279 in
Jacket Thickness	0.508 mm \| 0.02 in
Conductor Gauge, singles	23 AWG

Electrical Specifications

dc Resistance Unbalance, maximum	4 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	67 %
Operating Frequency, maximum	500 MHz
Operating Voltage, maximum	80 V
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Safety Voltage Rating	300 V

Electrical Cable Performance

CommScope

Std

Refers to the standard value listed under Transmission Standards in the Electrical Specifications above

Typ

Typical

Insertion Loss (dB/100m)

Near End Crosstalk (dB/100m)

ACR

Attenuation to Crosstalk Ratio (dB/100m))

PSNEXT

Power Sum Near End Crosstalk (db/100m)

PSACR

Power Sum Attenuation to Crosstalk Ratio (dB/100m)

ACRF

Attenuation to Crosstalk Ratio - Far End (dB/100m)

PSACRF

Insertion Loss (dB/100m)

Return Loss (dB)

Frequency	IL, STD	NEXT, STD	ACR, STD	PSNEXT, STD	PSACR, STD	ACRF, STD	PSACRF, STD	RL, STD
1.00 MHz	2.1	75.3	73.2	72.3	70.2	68.0	65.0	20.0
4.00 MHz	3.8	66.3	62.5	63.3	59.5	55.9	53.0	23.0
8.00 MHz	5.3	61.7	56.4	58.7	53.4	49.9	46.9	24.5
10.00 MHz	5.9	60.3	54.4	57.3	51.4	48.0	45.0	25.0
16.00 MHz	7.5	57.2	49.7	54.2	46.7	43.9	40.9	25.0
20.00 MHz	8.4	55.8	47.4	52.8	44.4	42.0	39.0	25.0
25.00 MHz	9.4	54.3	44.9	51.3	41.9	40.0	37.0	24.3
31.25 MHz	10.5	52.9	42.4	49.9	39.4	38.1	35.1	23.6
62.50 MHz	15.0	48.4	33.4	45.4	30.4	32.1	29.1	21.5
100.00 MHz	19.1	45.3	26.2	42.3	23.2	28.0	25.0	20.1
155.00 MHz	24.1	42.4	18.3	39.4	15.3	24.2	21.2	18.8
200.00 MHz	27.6	40.8	13.2	37.8	10.2	22.0	19.0	18.0
250.00 MHz	31.1	39.3	8.3	36.3	5.3	20.0	17.0	17.3
300.00 MHz	34.3	38.1	3.9	35.1	0.9	18.4	15.5	16.8
350.00 MHz	37.2	37.1	-0.1	34.1	-3.1	17.1	14.1	16.3
400.00 MHz	40.1	36.3	-3.8	33.3	-6.8	15.9	13.0	15.9
500.00 MHz	45.3	34.8	-10.5	31.8	-13.5	14.0	11.0	15.2

Material Specifications

Conductor Material	Bare copper
Insulation Material	Polyolefin
Jacket Material	PVC
Separator Material	Polyolefin
Tape Material	Poly/Aluminum/Poly

Mechanical Specifications

Pulling Tension, maximum

11.34 kg | 25 lb

Environmental Specifications

Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Environmental Space	Non-plenum
Flame Test Method	CMR \| NEC Article 800 \| UL 1666 \| UL 910

Packaging and Weights

Cable weight	46.297 kg/km \| 31.11 lb/kft
Packaging Type	Reel

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant