Your web browser (Internet Explorer 11 or lower) is out of date and the functions below will not work with Internet Explorer.
Update your browser for more security, speed, functionality and experience on this site.
Asia | Australia/New Zealand | EMEA | Latin America | North America
Portfolio
SYSTIMAX®
Product Type
Twisted pair cable
Product Brand
GigaSPEED XL®
General Specifications
Product Number
3073A
ANSI/TIA Category
6
Cable Component Type
Horizontal
Cable Type
U/UTP (unshielded)
Conductor Type, singles
Solid
Conductors, quantity
8
Pairs, quantity
4
Separator Type
Isolator | Tape separator
Transmission Standards
ANSI/TIA-568.2-D | CENELEC EN 50288-6-1 | ISO/IEC 11801 Class E
Dimensions
Diameter Over Jacket, nominal
6.782 mm | 0.267 in
Jacket Thickness
0.635 mm | 0.025 in
Conductor Gauge, singles
21 AWG
Electrical Specifications
Insertion Loss Margin
20% to Category 6 standard
Characteristic Impedance
100 ohm
dc Resistance Unbalance, maximum
5 %
dc Resistance, maximum
4.69 ohms/100 m | 1.430 ohms/100 ft
Delay Skew, maximum
45 ns
Dielectric Strength, minimum
1500 Vac | 2500 Vdc
Mutual Capacitance at Frequency
6.4 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)
70 %
Operating Frequency, maximum
250 MHz
Operating Voltage, maximum
80 V
Remote Powering
Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Safety Voltage Rating
300 V
Material Specifications
Conductor Material
Bare copper
Insulation Material
Polyolefin
Jacket Material
Low Smoke Zero Halogen (LSZH)
Separator Material
Polyolefin
Product Classification
Regional Availability
Asia | Australia/New Zealand | EMEA | Latin America | North America
Portfolio
SYSTIMAX®
Product Type
Twisted pair cable
Product Brand
GigaSPEED XL®
General Specifications
Product Number
3073A
ANSI/TIA Category
6
Cable Component Type
Horizontal
Cable Type
U/UTP (unshielded)
Conductor Type, singles
Solid
Conductors, quantity
8
Pairs, quantity
4
Separator Type
Isolator | Tape separator
Transmission Standards
ANSI/TIA-568.2-D | CENELEC EN 50288-6-1 | ISO/IEC 11801 Class E
Dimensions
Diameter Over Jacket, nominal
6.782 mm | 0.267 in
Jacket Thickness
0.635 mm | 0.025 in
Conductor Gauge, singles
21 AWG
Electrical Specifications
Insertion Loss Margin
20% to Category 6 standard
Characteristic Impedance
100 ohm
dc Resistance Unbalance, maximum
5 %
dc Resistance, maximum
4.69 ohms/100 m | 1.430 ohms/100 ft
Delay Skew, maximum
45 ns
Dielectric Strength, minimum
1500 Vac | 2500 Vdc
Mutual Capacitance at Frequency
6.4 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)
70 %
Operating Frequency, maximum
250 MHz
Operating Voltage, maximum
80 V
Remote Powering
Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A