Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RVV-65M-R3VB

6-port sector antenna, 2x 698-960, 4x1710-2690 MHz, 65° HPBW, 3x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • 3 Independent Arrays (1 Low band and 2 high bands) in a single radome housing with small formfactor
  • Symmetrical high band arrays with consistent electrical performance
  • Excellent RF pattern control – over the full operating band and tilt range for desired coverage and interference containment
  • Pluggable RET with retractable tilt scale

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 397 mm | 15.630 in
Depth 157 mm | 6.181 in
Length 997 mm | 39.252 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W

Electrical Specifications

Frequency Band, MHz 698–787 783–806 806–960 1710–1880 1850–1920 1920–2180 2300–2500 2500–2690
Gain, dBi 12.8 13.2 14.1 14.8 14.8 15.5 16.2 16.5
Beamwidth, Horizontal, degrees 67 64 62 70 70 67 62 61
Beamwidth, Vertical, degrees 23.4 21.7 19.5 12.7 12 11.4 10.3 9.6
Beam Tilt, degrees 3–16 3–16 3–16 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 18 18 19 17 18 18 20 19
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 26 28 28 27 28 29 30 29
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 250 250 250 200 200 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 247.0 N @ 150 km/h (55.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 140.0 N @ 150 km/h (31.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 398.0 N @ 150 km/h (89.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 492 mm | 19.370 in
Depth, packed 277 mm | 10.906 in
Length, packed 1177 mm | 46.339 in
Weight, gross 20.4 kg | 44.974 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 397 mm | 15.630 in
Depth 157 mm | 6.181 in
Length 997 mm | 39.252 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W

Electrical Specifications

Frequency Band, MHz 698–787 783–806 806–960 1710–1880 1850–1920 1920–2180 2300–2500 2500–2690
Gain, dBi 12.8 13.2 14.1 14.8 14.8 15.5 16.2 16.5
Beamwidth, Horizontal, degrees 67 64 62 70 70 67 62 61
Beamwidth, Vertical, degrees 23.4 21.7 19.5 12.7 12 11.4 10.3 9.6
Beam Tilt, degrees 3–16 3–16 3–16 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 18 18 19 17 18 18 20 19
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 26 28 28 27 28 29 30 29
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 250 250 250 200 200 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 247.0 N @ 150 km/h (55.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 140.0 N @ 150 km/h (31.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 398.0 N @ 150 km/h (89.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 492 mm | 19.370 in
Depth, packed 277 mm | 10.906 in
Length, packed 1177 mm | 46.339 in
Weight, gross 20.4 kg | 44.974 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification