Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

4P-4L-A2

4-port sector antenna, 4x 694–960 MHz, 65° HPBW, 2x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 467 mm | 18.386 in
Depth 167 mm | 6.575 in
Length 1497 mm | 58.937 in
Net Weight, antenna only 15.6 kg | 34.392 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 800 W
BASTA Version, electrical BASTA v12

Electrical Specifications

R1,R2 R1,R2 R1,R2
Frequency Band, MHz 694–790 790–890 890–960
RF Port 1-4 1-4 1-4
Gain, dBi 14.5 14.8 15.2
Beamwidth, Horizontal, degrees 62 60 60
Beamwidth, Vertical, degrees 15.1 13.6 12.6
Beam Tilt, degrees 2–16 2–16 2–16
USLS (First Lobe), dB 15 18 18
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 27 28 28
Isolation, Cross Polarization, dB 25 25 25
Isolation, Inter-band, dB 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 300 300 300

Mechanical Specifications

Wind Loading @ Velocity, frontal 595.0 N @ 150 km/h (133.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 222.0 N @ 150 km/h (49.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 735.0 N @ 150 km/h (165.2 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 542 mm | 21.339 in
Depth, packed 277 mm | 10.906 in
Length, packed 1697 mm | 66.811 in
Weight, gross 25 kg | 55.116 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 467 mm | 18.386 in
Depth 167 mm | 6.575 in
Length 1497 mm | 58.937 in
Net Weight, antenna only 15.6 kg | 34.392 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 800 W
BASTA Version, electrical BASTA v12

Electrical Specifications

R1,R2 R1,R2 R1,R2
Frequency Band, MHz 694–790 790–890 890–960
RF Port 1-4 1-4 1-4
Gain, dBi 14.5 14.8 15.2
Beamwidth, Horizontal, degrees 62 60 60
Beamwidth, Vertical, degrees 15.1 13.6 12.6
Beam Tilt, degrees 2–16 2–16 2–16
USLS (First Lobe), dB 15 18 18
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 27 28 28
Isolation, Cross Polarization, dB 25 25 25
Isolation, Inter-band, dB 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 300 300 300

Mechanical Specifications

Wind Loading @ Velocity, frontal 595.0 N @ 150 km/h (133.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 222.0 N @ 150 km/h (49.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 735.0 N @ 150 km/h (165.2 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 542 mm | 21.339 in
Depth, packed 277 mm | 10.906 in
Length, packed 1697 mm | 66.811 in
Weight, gross 25 kg | 55.116 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification