8P-2L6M-D4-V5

8-port sector antenna, 2x 694–960 and 6x 1695–2690 MHz, 65° HPBW, 4x RET with tilt indicators

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

4 Independent Arrays (1 Low band and 3 high bands) in a single radome housing
Optimized radome design leading to market leading wind load performance
Antenna with retractable tilt scale indicators and integrated pluggable RET
Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Aluminum \| Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	6
RF Connector Quantity, low band	2
RF Connector Quantity, total	8

RET Hardware	CommRET v2
RET Interface	2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (3) \| Low band (1)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Width	301 mm \| 11.850 in
Depth	181 mm \| 7.126 in
Length	2688 mm \| 105.827 in
Net Weight, without mounting kit	22.3 kg \| 49.163 lb

Click on image to enlarge.

Click on image to enlarge.

Frequency Band, MHz	694–790	790–890	890–960	1695–1920	1920–2200	2300–2500	2500–2690
Gain, dBi	16.5	16.7	16.7	17.7	17.9	17.5	17.7
Beamwidth, Horizontal, degrees	70	67	64	65	66	66	63
Beamwidth, Vertical, degrees	8.3	7.5	7.0	7.2	6.6	5.8	5.4
Beam Tilt, degrees	0–10	0–10	0–10	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	19	18	18	17	19	20	18
Front-to-Back Ratio at 180°, dB	30	33	33	36	35	31	33
Front-to-Back Ratio, Copolarization 180° ± 30°, dB	30	31	29	31	30	28	28
Isolation, Cross Polarization, dB	27	27	27	27	27	27	27
Isolation, Inter-band, dB	27	27	27	27	27	27	27
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-150
Input Power per Port, maximum, watts	500	500	500	300	300	250	250

Wind Loading @ Velocity, frontal	441.0 N @ 150 km/h (99.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	374.0 N @ 150 km/h (84.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	746.0 N @ 150 km/h (167.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	448.0 N @ 150 km/h (100.7 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Aluminum \| Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	6
RF Connector Quantity, low band	2
RF Connector Quantity, total	8

RET Hardware	CommRET v2
RET Interface	2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (3) \| Low band (1)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Width	301 mm \| 11.850 in
Depth	181 mm \| 7.126 in
Length	2688 mm \| 105.827 in
Net Weight, without mounting kit	22.3 kg \| 49.163 lb

Frequency Band, MHz	694–790	790–890	890–960	1695–1920	1920–2200	2300–2500	2500–2690
Gain, dBi	16.5	16.7	16.7	17.7	17.9	17.5	17.7
Beamwidth, Horizontal, degrees	70	67	64	65	66	66	63
Beamwidth, Vertical, degrees	8.3	7.5	7.0	7.2	6.6	5.8	5.4
Beam Tilt, degrees	0–10	0–10	0–10	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	19	18	18	17	19	20	18
Front-to-Back Ratio at 180°, dB	30	33	33	36	35	31	33
Front-to-Back Ratio, Copolarization 180° ± 30°, dB	30	31	29	31	30	28	28
Isolation, Cross Polarization, dB	27	27	27	27	27	27	27
Isolation, Inter-band, dB	27	27	27	27	27	27	27
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-150
Input Power per Port, maximum, watts	500	500	500	300	300	250	250

Wind Loading @ Velocity, frontal	441.0 N @ 150 km/h (99.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	374.0 N @ 150 km/h (84.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	746.0 N @ 150 km/h (167.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	448.0 N @ 150 km/h (100.7 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)