Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

V65S-C3-1XR

2-port small cell antenna, 2x 1695–2690 MHz, 65° HPBW, 1x RET with manual override.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Provides a future-ready antenna solution with flexibility to reassign antenna, for example GSM 1800 service to 2.6GHz LTE at a later date
  • Employs state-of-the-art ultra wideband technology providing excellent RF performance in all bands
  • RF technology flexible—suitable for LTE, UMTS, CDMA, GSM, AWS, WiMAX, and other applications from 1.7–2.7 GHz
  • Excellent RF pattern control over the full operating band and tilt range for desired coverage and interference containment
  • 4.3-10 connector significantly improves PIM consistency and smaller footprint on antenna bottom

General Specifications

Antenna Type Small Cell
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 170 mm | 6.693 in
Depth 105 mm | 4.134 in
Length 600 mm | 23.622 in
Net Weight, without mounting kit 3.8 kg | 8.378 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 13.4 13.8 13.9 14.4 14.5
Beamwidth, Horizontal, degrees 70 68 69 63 61
Beamwidth, Vertical, degrees 18.5 17.2 16.4 14.4 13.6
Beam Tilt, degrees 0–20 0–20 0–20 0–20 0–20
USLS (First Lobe), dB 15 17 17 17 14
Front-to-Back Ratio at 180°, dB 27 27 28 28 25
Isolation, Cross Polarization, dB 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port, maximum, watts 300 300 300 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 118.0 N @ 150 km/h (26.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 48.0 N @ 150 km/h (10.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 151.0 N @ 150 km/h (33.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 302 mm | 11.89 in
Depth, packed 212 mm | 8.346 in
Length, packed 726 mm | 28.583 in
Weight, gross 8.9 kg | 19.621 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Small Cell
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 170 mm | 6.693 in
Depth 105 mm | 4.134 in
Length 600 mm | 23.622 in
Net Weight, without mounting kit 3.8 kg | 8.378 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 13.4 13.8 13.9 14.4 14.5
Beamwidth, Horizontal, degrees 70 68 69 63 61
Beamwidth, Vertical, degrees 18.5 17.2 16.4 14.4 13.6
Beam Tilt, degrees 0–20 0–20 0–20 0–20 0–20
USLS (First Lobe), dB 15 17 17 17 14
Front-to-Back Ratio at 180°, dB 27 27 28 28 25
Isolation, Cross Polarization, dB 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port, maximum, watts 300 300 300 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 118.0 N @ 150 km/h (26.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 48.0 N @ 150 km/h (10.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 151.0 N @ 150 km/h (33.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 302 mm | 11.89 in
Depth, packed 212 mm | 8.346 in
Length, packed 726 mm | 28.583 in
Weight, gross 8.9 kg | 19.621 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification